|Table of Contents|

Study on Formation Mechanism of Blowholes in Nodular Cast Iron(PDF)

南京师范大学学报(工程技术版)[ISSN:1006-6977/CN:61-1281/TN]

Issue:
2012年04期
Page:
78-81
Research Field:
Publishing date:

Info

Title:
Study on Formation Mechanism of Blowholes in Nodular Cast Iron
Author(s):
Sun Shaodong1Zhang Mengqun2Ma Xiang2He Shijian1Wan Suwen1
1.Mechanical & Electrical Engineering Department,Huaian College of Information Technology,Huaian 223003,China
Keywords:
nodular cast iron subcutaneous blowholebubble transfer graphitization expansion oxide film
PACS:
TG255
DOI:
-
Abstract:
The subcutaneous blowhole is one of defects in nodular cast iron,and its formation mechanism has no final conclusion in the area of foundry technology. Because non-metallic inclusion always transfers in metal liquid together with bubbles,we believe that determinations of magnesium in different inner parts of a casting will be helpful in analyzing the motion paths of bubbles migration. The testing results have shown that the magnesium content gradually increases from the surface to the center of the casting,and the oxide film has shown enrichment of magnesium and sulfur. Our study shows that the oxide films hinder the bubbles to transfer outward and those stranded bubbles form subcutaneous blowholes. Increasing of carbon equivalent will raise the graphitization expansion property, and in the meanwhile accelerate the bubbles transfer, so, the subcutaneous blowholes will be avoided.

References:

[1] 司乃潮. 球铁件皮下气孔缺陷形成的影响因素分析[J]. 铸造, 1997( 4) : 38-40. Si Naichao. Analysis of influence factors on blowhole defect in nodular cast iron[J]. Foundry, 1997( 4) : 38-40. ( in Chinese)
[2] 刘荣,檀传淼,周松流. 球墨铸铁活塞环皮下气孔的扫描电镜分析[J]. 铸造, 2001( 12) : 756-758. Liu Rong,Tan Chuanmiao,Zhou Songliu. Analysis of subskin blowhole of nodular iron in piston ring through scanning electronic microscope[J]. Foundry, 2001( 12) : 756-758. ( in Chinese)
[3] 王景德. 球墨铸铁产生皮下气孔的影响因素及预防[J]. 铸造, 1994( 7) : 25-29. Wang Jingde. Influence factors and precautions of blowholes in nodular cast iron[J]. Foundry, 1994( 7) : 25-29. ( in Chinese)
[4] 李庆春. 铸件形成理论基础[M]. 北京: 机械工业出版社, 1982: 192. Li Qingchun. Theoretical Foundation of Casting Formation[M]. Beijing: China Machine Press, 1982: 192. ( in Chinese)
[5] 周亘,刘婉华. 球铁件皮下气孔产生原因及防止方法[J]. 现代铸铁, 2008( 5) : 15-25. Zhou Gen,Liu Wanhua. Factors influencing pinhole formation of nodular iron castings and pinhole prevention measures[J]. Modern Cast Iron, 2008( 5) : 15-25. ( in Chinese)
[6] 孙渭清,郭领军. 综述球铁件的皮下气孔[J]. 铸造技术, 1996( 4) : 32-36. Sun Weiqing,Guo Lingjun. Summary of subsurface blowhole in nodular cast iron[J]. Foundry Technology, 1996( 4) : 32-36. ( in Chinese)
[7] 陆文华. 铸铁及其熔炼[M]. 北京: 机械工业出版社, 1986: 94. Lu Wenhua. Cast Iron and Its Melting[M]. Beijing: China Machine Press, 1986: 94. ( in Chinese)
[8] 代金水,罗能. 球墨铸铁导盘常见缺陷分析与对策( 下) [J]. 金属加工, 2010( 7) : 67-69. Dai Jinshui,Luo Neng. Analysis and precaution on common pitfalls in nodular iron casting guide disc[J]. Machinist Metal Forming, 2010( 7) : 67-69. ( in Chinese)
[9] 徐建林. 球铁件皮下气孔影响因素的研究[J]. 铸造,2002( 10) : 614-617. Xu Jianlin. Study on influence factors on surface blowhole in ductile iron casting[J]. Foundry, 2002( 10) : 614-617. ( in Chinese)
[10] 徐锦峰,翟秋亚,袁森,等. 过共晶球铁凝固过程中奥氏体的生长方式与形貌特征[J]. 金属学报,2003,39 ( 2) : 136-139 Xu Jinfeng,Zhai Qiuya,Yuan Sen, et al. Morphology characteristic and growing manner of austenite in hypereutectic ductile iron during solidification process[J]. Acta Metallurgic Sinica, 2003, 39( 2) : 136-139. ( in Chinese)
[11] 孙少东,徐松奎,李健. 利用石墨化膨胀消除球铁皮下气孔的研究[J]. 热加工工艺, 2004( 5) : 35-36. Sun Shaodong,Xu Songkui,Li Jian. Study on making use of graphitizing expansion to eliminate surface blowhole of ductile cast iron[J]. Hot Working Technology, 2004( 5) : 35-36. ( in Chinese)

Memo

Memo:
-
Last Update: 2013-03-21