[1] 杨继全,冯春梅. 3D打印(面向未来的制造技术)[M]. 北京:化学工业出版社,2014:28-32.
YANG J Q,FENG J M. 3D Printing(Future-oriented manufacturing technology)[M]. Beijing:Chemical Industry Press,2014:28-35.(in Chinese)
[2]王明杰,刘舒云,郭维民,等. 干细胞在软骨再生中的应用[J]. 中国医药生物技术,2016(5):457-462.
WANG M J,LIU S Y,GUO W M,et al. Application of stem cells in cartilage regeneration[J]. Chinese pharmaceutical biotechnology,2016(5):457-462.
[3]ODA T,SAKAI T,HIRAIWA H,et al. Osteoarthritis-derived chondrocytes are a potential source of multipotent progenitor cells for cartilage tissue engineering[J]. Biochemical and biophysical research communications,2016,479(3):469-475.
[4]肖东亮,赵劲民. 骨性关节炎的治疗新进展[J]. 中国现代医生,2010(2):14-16.XIAO D L,ZHAO J M. New progress in the treatment of osteoarthritis[J]. Modern Chinese medicine,2010(2):14-16.(in Chinese)
[5]刘杰. 人工活性骨三维仿生建模方法研究[D]. 西安:西安科技大学,2004.
LIU J. Study on the method of 3D bionic modeling of artificial bone[D]. Xi’an: University of Science and Technology,2004.(in Chinese)
[6]NUKAVARAPU S P,DORCEMUS D L. Osteochondral tissue engineering:current strategies and challenges[J]. Biotechnology advances,2013,31(5):706-721.
[7]王镓垠,柴磊,刘利彪,等. 人体器官3D打印的最新进展[J]. 机械工程学报,2014,23:119-127.
WANG J Y,CHAI L,LIU L B,et al. Progress in the 3D printing of human organs[J]. Chinese journal of mechanical engineering,2014,23:119-127.(in Chinese)
[8]KIM Y S,SHIN Y S,CHOI J W,et al. The application of three-dimensional printing in animal model of augmentation rhinoplasty[J]. Annals of biomedical engineering,2015,43(9):2 153-2 162.
[9]CATHAL D O,DI BELLA C,THOMPSON F,et al. Development of the Biopen:a handheld device for surgical printing of adipose stem cells at a chondral wound site[J]. Biofabrication,2016,8(1):015019.
[10]MUMME M,BARBERO A,MIOT S,et al. Nasal chondrocyte-based engineered autologous cartilage tissue for repair of articular cartilage defects:an observational first-in-human trial[J]. The lancet,2016,388(10055):1 985-1 994.
[11]CUI X,BREITENKAMP K,FINN M G,et al. Direct human cartilage repair using three-dimensional bioprintingtechnology[J]. Tissue engineering part A,2012,18(11/12):1 304-1 312.
[12]RAMPICHOVá M,FILOVá E,VARGA F,et al. Fibrin/hyaluronic acid composite hydrogels as appropriate scaffolds for in vivo artificial cartilage implantation[J]. Asaio journal,2010,56(6):563-568.
[13]柴岗,张艳,刘伟,等. 基于Micro-CT的三维打印组织工程骨建模技术[J]. 组织工程与重建外科杂志,2007(5):247-248.
CHAI G,ZHANG Y,LIU W,et al. Micro-CT-based three-dimensional printing tissue engineering bone modeling technology[J]. Journal of tissue engineering and reconstructive surgery,2007(5):247-248.(in Chinese)
[14]尤飞. 面向骨组织工程的仿生支架建模研究[D]. 上海:上海大学,2011.
YOU F. Bionic scaffold modeling for bone tissue engineering[D]. Shanghai:Shanghai University,2011.(in Chinese)
[15]孙伟. 计算机辅助组织工程在组织支架仿生建模和设计中的应用[J]. 医用生物力学,2005(4):247-255.
SUN W. Computer-assisted tissue engineering in tissue scaffold biomimetic modeling and design[J]. Medical biomechanics,2005(4):247-255.(in Chinese)
[16]CHANG C C,CHEN Y,ZHOU S,et al. Biomaterials for implants and scaffolds[M]. Berlin:Springer-Verlag,2017:349-369.
[17]王富友. 组织工程骨软骨仿生设计与初步构建[D]. 重庆:第三军医大学,2008.
WANG F Y. Tissue engineering bone cartilage bionic design and initial construction[D]. Chongqing:Third Military Medical University,2008.(in Chinese)
[18]YANG S,LEONG K F,DU Z,et al. The design of scaffolds for use in tissue engineering. Part Ⅱ. Rapid prototyping techniques[J]. Tissue engineering,2002,8(1):1-11.
[19]SAWYER A A,SONG S J,SUSANTO E,et al. The stimulation of healing within a rat calvarial defect by mPCL-TCP/collagen scaffolds loaded with rhBMP-2[J]. Biomaterials,2009,30(13):2 479-2 488.
[20]ROHNER D,HUTMACHER D W,CHENG T K,et al. In vivo efficacy of bone-marrow-coated polycaprolactone scaffolds for the reconstruction of orbital defects in the pig[J]. Journal of biomedical materials research part B:applied biomaterials,2003,66(2):574-580.
[21]CASTRO N J,PATEL R,ZHANG L G. Design of a novel 3D printed bioactive nanocomposite scaffold for improved osteochondral regeneration[J]. Cellular and molecular bioengineering,2015,8(3):416-432.
[22]LEE G,BARLOW J W. Selective laser sintering of bioceramic materials for implants[C]//Proceedings of the solid freeform fabrication symposium. Austin,TX,1993:376-380.
[23]VAIL N K,SWAIN L D,FOX W C,et al. Materials for biomedical applications[J]. Materials and design,1999,20(2):123-132.
[24]SHUAI C,MAO Z,LU H,et al. Fabrication of porous polyvinyl alcohol scaffold for bone tissue engineering via selective laser sintering[J]. Biofabrication,2013,5(1):015014.
[25]CHEN C H,SHYU V B H,CHEN J P,et al. Selective laser sintered poly-ε-caprolactone scaffold hybridized with collagen hydrogel for cartilage tissue engineering[J]. Biofabrication,2014,6(1):015004.
[26]SHERWOOD J K,RILEY S L,PALAZZOLO R,et al. A three-dimensional osteochondral composite scaffold for articular cartilage repair[J]. Biomaterials,2002,23(24):4 739-4 751.
[27]WEINAND C,GUPTA R,WEINBERG E,et al. Toward regenerating a human thumb in situ[J]. Tissue engineering part A,2009,15(9):2 605-2 615.
[28]赵姗. 纳米纤维素的光固化及其组织工程支架的可控制备研究[D].广州:华南理工大学,2015.
ZHAO S. Nano-cellulose light-curing and tissue engineering scaffold controllable preparation[D]. Guangzhou:South China University of Technology,2015.(in Chinese)
[29]郑欣,陈一心,邱旭升,等. 快速成型技术在骨组织工程中的应用进展[J]. 中国矫形外科杂志,2014,22(24):2 244-2 247.
ZHENG X,CHEN Y X,QIU X S,et al. Application of rapid prototyping technology in bone tissue engineering[J]. Chinese journal of orthopedic surgery,2014,22(24):2 244-2 247.(in Chinese)