|Table of Contents|

Analysis and Treatment of Conductive EMI Noisein Medical Electronic Equipment(PDF)

南京师范大学学报(工程技术版)[ISSN:1006-6977/CN:61-1281/TN]

Issue:
2017年02期
Page:
13-
Research Field:
电气与电子工程
Publishing date:

Info

Title:
Analysis and Treatment of Conductive EMI Noisein Medical Electronic Equipment
Author(s):
Wang ZhuangYang XiongZhao YangMa BaopingLi Shijin
School of Electrical and Automation Engineering,Nanjing Normal University,Nanjing 210042,China
Keywords:
medical electronic equipmentconduction noise mechanismconduction noise suppression
PACS:
TM461; TN03
DOI:
10.3969/j.issn.1672-1292.2017.02.002
Abstract:
In this paper,according to the EMC problem of medical electronic equipment,the generation mechanism of the conducted EMI noise is analyzed,which includes four kinds of situations,such as transient current,bad grounding,crosstalk and capacity coupling. This paper also puts forward the corresponding noise suppression scheme according to the formation mechanism of the conduction of EMI noise,including power decoupling,filter design,the ferrite core and shielding,and its validity and practicability are verified by two engineering examples.

References:

[1] STOCKMAN G J,LEMEY S,ROGIER H,et al. Full-wave modeling of interacting multiport devices with arbitrary relative positions and orientations for efficient EMI assessment [J]. IEEE transactions on electromagnetic compatibility,2016,58(4):1 322-1 330.
[2]HENRY W O. Electromagnetic compatibility engineering[J]. Wiley & Sons,2009,1(2):273-278.
[3]和军平,陈为,姜建国. 开关电源共模传导干扰模型的研究[J]. 中国电机工程学报,2005,25(8):50-55.
HE J P,CHEN W,JIANG J G. Model and analysis on common-mode conducted EMI of a switched mode power supply[J]. Proceedings of the CSEE,2005,25(8):50-55.(in Chinese)
[4]WONGPRASERT N,SYMANS M D. Application of a genetic algorithm for optimal damper distribution within the nonlinear seismic benchmark building[J]. Journal of engineering mechanics,2004,130(4):401-406.
[5]和军平,姜建国,陈为. 离线式PWM变换器电磁干扰传播通道模型的研究[J]. 电工技术学报,2004,19(4):56-60.
HE J P,JIANG J G,CHEN W. Study of the model of the EMI coupling paths of an off-line PWM converter[J]. Transactions of China electrotechnical society,2004,19(4):56-60.(in Chinese)
[6]STAHL J,KUEBRICH D,DUERBAUM T. Modification and characterization of a standard LISN for effective EMI noise separation[C]//ICEAA,Sydney,2010. IEEE,2010:39-42.
[7]GONG X,JOSIFOVIC I,FERREIRA J A. Modeling and reduction of conducted EMI of inverters with SiC JFETs on insulated metal substrate[J]. IEEE transactions on power electronics,2012,28(7):3 138-3 146.
[8]颜伟,赵阳,王恩荣,等. 复杂电子系统传导EMI噪声机理分析与处理[J]. 中国电机工程学报,2012,32(30):156-162.
YANG W,ZHAO Y,WANG E R,et al. Investigation and reduction on conducted electromagnetic interference noise mechanismfor complex power electronics systems[J]. Proceedings of the CSEE,2012,32(30):156-162.(in Chinese)
[9]STOCKMAN G J,LEMEY S,ROGIER H,et al. Full-wave modeling of interacting multiport devices with arbitrary relative positions and orientations for efficient EMI assessment[J]. IEEE transactions on electromagnetic compatibility,2016,58(4):1322-1330.

Memo

Memo:
-
Last Update: 2017-06-30