[1]晏敏杰.新兴高效流化床焚烧脱漆技术[J].南京师范大学学报(工程技术版),2012,12(04):082-86.
　Yan Minjie.On Emerging and Efficient Depainting Technology in Fluidized Bed Incinerator[J].Journal of Nanjing Normal University(Engineering and Technology),2012,12(04):082-86.
点击复制

新兴高效流化床焚烧脱漆技术
分享到：

南京师范大学学报（工程技术版）[ISSN:1006-6977/CN:61-1281/TN]

卷:
12卷
期数:
2012年04期
页码:
082-86
栏目:
出版日期:
2012-12-20

文章信息/Info

Title:
On Emerging and Efficient Depainting Technology in Fluidized Bed Incinerator
作者:
晏敏杰
南京化工特种设备检验检测研究所，江苏南京210047
Author(s):
Yan Minjie
Nanjing Institute of Chemical Special Equipment Inspection and Testing,Nanjing 210047,China
关键词:
流化床; 焚烧; 替代; 脱漆工艺
Keywords:
fluidized bed;  incineration;  replace; depainting technology
分类号:
X701
摘要:
以轿车制造领域为例,介绍了流化床焚烧脱漆技术的原理,及处理不同物料时的操作参数、焚烧所导致的烟气的处理工艺、物料裂解时间等;提出了以压缩天然气流化并加热石英砂为基础,采用热摩擦、气化剥离方式完成脱漆处理.与传统工艺相比,尾气排放速率降低,处理成本降低;无二次污染物;同样处理规模,固定资产投资节省30%.
Abstract:
With the car manufacturing as an example， the article introduces the principle of the depainting technology in fluidized bed incineration， the operating parameters dealing with different materials， the flue gas treatment technology caused by burning and material cracking time． The article proposes that the heat friction gasification adhering materials be taken to complete paint stripping treatment based on compressing the natural gas to stream and heat quartz sand． Compared with traditional process， this process has many advantages: reducing the emission rate and lowering processing cost， and no secondary pollutants． Moreover，with the same scale of treatment， 30% of the fixed investment can be saved．

参考文献/References:

［1］ 王锡春． 最新汽车涂装技术［M］． 北京: 机械工业出版社， 1998．Wang Xichun． The Latest Automotive Coating Technology［M］． Beijing: Machinery Industry Press， 1998． ( in Chinese)
［2］ 娄性义． 固体废物处理与利用［M］． 北京: 冶金工业出版社， 1996． Lou Xingyi． Processing and Utilization of Solid Waste［M］． Beijing: Metallurgical Industry Press， 1996． ( in Chinese)
［3］ 刘均科． 塑料废弃物的回收与利用技术［M］． 北京: 石化出版社， 2001． Liu Junke． Recycling and Using Technology of Plastic Waste［M］． Beijing: Petrochemical Press， 2001． ( in Chinese)
［4］ 彭长琪． 固体废物工程［M］． 武汉: 武汉理工大学出版社， 2004． Peng Changqi． Solid Waste Project［M］． Wuhan: Wuhan University of Science and Technology Press， 2004． ( in Chinese)
［5］ Mazza G，Falcoz Q． A particulate model of solid waste incineration in a fluidized bed combining combustion and heavy metal vaporization［J］． Combustion and Flame， 2009， 156: 2 084-2 092．
［6］ Taib M R，Swithenbank J，Nasserzadeh V， et al． Investigation of sludge waste incineration in a novel rotating fluidized bed incinerator ［J］． Institution of Chemical Engineers， 1999， 77( 5) 298-304．

相似文献/References:

[1]王文康,卜昌盛,熊金琴,等.流化床O2/CO2气氛对烟煤焦反应速率的影响研究王文康,卜昌盛,熊金琴,王昕晔,张居兵,朴桂林,张孝勇[J].南京师范大学学报(工程技术版),2017,17(04):053.[doi:10.3969/j.issn.1672-1292.2017.04.009]
　Wang Wenkang,Bu Changsheng,Xiong Jinqin,et al.Investigation on Reaction Rate of Bituminous Coal-Char Particlesin O2/CO2 Atmosphere in a Fluidized Bed[J].Journal of Nanjing Normal University(Engineering and Technology),2017,17(04):053.[doi:10.3969/j.issn.1672-1292.2017.04.009]

备注/Memo

备注/Memo:
通讯联系人:晏敏杰，工程师，研究方向: 压力容器及环保设备． E-mail: jiemingjh@163． Com
更新日期/Last Update: 2013-03-21