参考文献/References:
[1] 田芳,乔海灵. 三防保护涂覆工艺及设备[J]. 电子工艺技术,2006,27(2):108-110.
[TIAN F,QIAO H L. Protection technology and equipnent[J]. Electronics process technology,2006,27(2):108-110.(in Chinese)
[[2]鲜飞,刘江涛,易亚军,等. 电子制造业中的三防涂覆技术[J]. 电子工艺技术,2015,36(5):278-280.
[XIAN F,LIU J T,YI Y J,et al. Protection and coating technology of PCBA in electronic assembly field[J]. Electronics process technology,2015,36(5):278-280.(in Chinese)
[[3]鲍秀森,陈红. 选择性涂覆工艺研究[C]//第五届电子产品防护技术研讨会. 承德:中国电子学会,2006.
[BAO X S,CHEN H.The research of selective coating process[C]//The 5th Symposium on Protection of Electronic Products. Chengde:Chinese Institute of Electronic,2006.(in Chinese)
[[4]LI S,CHEN W,LIU F,et al. NN-GA based printing parameters optimization for 3DP[C]//2013 International Symposium on Assembly and Manufacturing. Xi’an:The Institution of Electrical Engineers,2013.
[[5]肖渊,黄亚超. 气动式微滴喷射过程仿真与尺寸均匀性试验研究[J]. 中国机械工程,2014,25(21):2936-2941.
[XIAO Y,HUANG Y C. Simulation of pneumatic driven microdroplet jetting process and experimental study of microdroplet’s uniformity[J]. China mechanical engineering,2014,25(21):2936-2941.(in Chinese)
[[6]尹亚楠. 数字微喷光固化三维打印成型装置设计与试验[D]. 南京:南京师范大学,2015.
[YIN Y N. Design and experiment of digital micro injection curing 3D printing device[D]. Nanjing:Nanjing Normal University,2015.(in Chinese)
[[7]杨沛林,闫文娥,田芳,等. 选择性涂覆设备[J]. 电子工艺技术,2005,26(5):301-303.
[YANG P L,YAN W E,TIAN F,et al. Selective conformal coating equipment[J]. Electronics process technology,2005,26(5):301-303.(in Chinese)
[[8]LE B C,VINCENT S,ARQUIS E. Impact and solidification of indium droplets on a cold substrate[J]. International journal of thermal science,2005,44(3):219-233.
[[9]高宇,杨建飞,邱鑫,等. 基于数字微喷的金属粉末三维打印实现方法研究[J]. 南京师范大学学报(工程技术版),2017,17(3):1-6.
[GAO Y,YANG J F,QIU X,et al. Research on the realization method of 3D printing system of metal powder based on digital micro injection[J]. Journal of Nanjing normal university(engineering and technology edition),2017,17(3):1-6.(in Chinese)
[[10]吴任东,魏大忠,周浩颖,等. 三维数字微滴喷射成形技术的发展现状[J]. 新技术新工艺,2004(2):35-38.vWU R D,WEI D Z,ZHOU H Y,et al. The devlopment of 3D digtal micro-droplet jetting forming[J]. New technology & new process,2004(2):35-38.(in Chinese)
[[11]李宗安. 基于数字化液滴微喷射的微流控芯片制备技术及实验研究[D]. 南京:南京理工大学,2015.
[LI Z A. Digital droplet micro-jetting prepared microfluidic chip technology and its experimental research[D]. Nanjing:Nanjing University of Science and Technology,2015.(in Chinese)
[[12]劳奇成,卢秉恒. 三维打印机喷头的驱动系统[J]. 机械工程师,2003(10):25-27.
[LAO Q C,LU B H.The driving system of solid-ink jet printhead in three-dimension printer[J]. Mechanical engineer,2003(10):25-27.(in Chinese)
[[13]徐林峰. 均匀液滴喷射微制造技术基础研究[D]. 西安:西北工业大学,2005.
[XU L F.Foundational research on uniform droplets spraying micro-fabrication technology[D]. Xi’an:Northwestern Polytechnical University,2005.(in Chinese)
相似文献/References:
[1]李 蒙,宋春雨,谷静平,等.三维打印中的底层多边形优化[J].南京师范大学学报(工程技术版),2016,16(03):029.[doi:10.3969/j.issn.1672-1292.2016.03.005]
Li Meng,Song Chunyu,Gu Jingping,et al.Underlying Polygon Optimization in Three Dimensional Printing[J].Journal of Nanjing Normal University(Engineering and Technology),2016,16(02):029.[doi:10.3969/j.issn.1672-1292.2016.03.005]
[2]朱小刚,刘正武,乔凤斌,等.基于同步改性浸渍的碳纤维增强树脂复合材料三维打印工艺研究[J].南京师范大学学报(工程技术版),2019,19(01):045.[doi:10.3969/j.issn.1672-1292.2019.01.006]
Zhu Xiaogang,Liu Zhengwu,Qiao Fengbin,et al.3D Printing of Carbon Fiber Reinforced Resin CompositesBased on Fiber Synchronously Modified Impregnation[J].Journal of Nanjing Normal University(Engineering and Technology),2019,19(02):045.[doi:10.3969/j.issn.1672-1292.2019.01.006]