参考文献/References:
[1] 白婉宁,赵阳,刘强强,等. 基于孔缝设计的开关电源外壳电磁屏蔽特性研究[J]. 南京师范大学学报(工程技术版),2019,19(4):86-91.
[2]曾美玲,蔡金良,易早,等. 孔缝对金属腔体强电磁脉冲耦合特性影响研究[J]. 强激光与粒子束,2021,33(4):39-48.
[3]TAKAHASHI N,NAKAZAKI S,MIYAGI D. Optimization of electromagnetic and magnetic shielding using ON/OFF method[J]. IEEE Transactions on Magnetics,2010,46(8):3153-3156.
[4]SEVGI L. Electromagnetic screening and shielding-effectiveness(SE)modeling[J]. IEEE Antennas and Propagation Magazine,2009,51(1):211-216.
[5]王永安,赵阳,蓝雨晨,等. 基于进化差分算法的环形电感建模及应用[J]. 南京师范大学学报(工程技术版),2020,20(3):32-37.
[6]公延飞,郝建红,蒋璐行,等. 基于Bethe小孔耦合理论和镜像原理的双腔体电磁泄漏的解析模型[J]. 电工技术学报,2018,33(9):2139-2147.
[7]NIE B L,DU P A. Electromagnetic shieldingperformance of highly resonant enclosures by acombination of the FETD and extended Prony’s method[J]. IEEE Transactions on Electromagnetic Compatibility,2014,56(2):320-327.
[8]YAN Z,QIN F,CAI J. Shielding effectiveness of materials under the excitation of high-power microwave[J]. IEEE Transactions on Electromagnetic Compatibility,2020,62(5):2317-2320.
[9]周泽伦. 带孔缝箱体电磁屏蔽效能的研究[J]. 西安科技大学学报,2016,36(1):122-126.
[10]胡溥宇. 任意平面波辐照下开孔矩形腔体屏蔽效能快速计算方法[J]. 电工技术学报,2018,33(15):3651-3660.
[11]ROBINSON M P,TURNER J D,THOMAS D W P,et al. Shielding effectiveness of a rectangular enclosure with a rectangular aperture[J]. Electronics Letters,1996,32(17):1559-1560.
[12]张亚普,达新宇,谢铁城. 孔缝箱体屏蔽效能电磁拓扑分析模型 [J]. 强激光与粒子束,2014,26(2):228-233.
[13]焦重庆,牛帅,李琳. 复合材料工频电场和工频磁场屏蔽效能实验研究 [J]. 电工技术学报,2015,30(10):1-6.
相似文献/References:
[1]鲍怡伶,张浩然,赵 阳.Boost PFC电路辐射EMI分析与抑制研究[J].南京师范大学学报(工程技术版),2019,19(04):075.[doi:10.3969/j.issn.1672-1292.2019.04.013]
Bao Yiling,Zhang Haoran,Zhao Yang.Research on Radiation Electromagnetic Interference Analysisand Suppression of Boost PFC Circuit[J].Journal of Nanjing Normal University(Engineering and Technology),2019,19(02):075.[doi:10.3969/j.issn.1672-1292.2019.04.013]
[2]白婉宁,赵 阳,刘强强,等.基于孔缝设计的开关电源外壳电磁屏蔽特性研究[J].南京师范大学学报(工程技术版),2019,19(04):086.[doi:10.3969/j.issn.1672-1292.2019.04.015]
Bai Wanning,Zhao Yang,Liu Qiangqiang,et al.Research on Electromagnetic Shielding Characteristics of SwitchingPower Supply Enclosure Based on Hole Slot Design[J].Journal of Nanjing Normal University(Engineering and Technology),2019,19(02):086.[doi:10.3969/j.issn.1672-1292.2019.04.015]