[1]高 宇,杨建飞,邱 鑫,等.基于数字微喷的金属粉末三维打印实现方法研究[J].南京师范大学学报(工程技术版),2017,17(03):001.[doi:10.3969/j.issn.1672-1292.2017.03.001]
 Gao Yu,Yang Jianfei,Qiu Xin,et al.Research on the Realizationmethod of 3D Printing System ofMetal Powder Based on Digital Micro Injection[J].Journal of Nanjing Normal University(Engineering and Technology),2017,17(03):001.[doi:10.3969/j.issn.1672-1292.2017.03.001]
点击复制

基于数字微喷的金属粉末三维打印实现方法研究
分享到:

南京师范大学学报(工程技术版)[ISSN:1006-6977/CN:61-1281/TN]

卷:
17卷
期数:
2017年03期
页码:
001
栏目:
增材制造(3D打印)
出版日期:
2017-09-30

文章信息/Info

Title:
Research on the Realizationmethod of 3D Printing System ofMetal Powder Based on Digital Micro Injection
文章编号:
1672-1292(2017)03-0001-06
作者:
高 宇1杨建飞1邱 鑫1程继红1郭爱琴1杨继全1王浩亮2刘 训1
(1.南京师范大学江苏省三维打印装备与制造重点实验室,江苏 南京 210042)(2.江苏远东电机制造有限公司,江苏 泰州 225500)
Author(s):
Gao Yu1Yang Jianfei1Qiu Xin1Cheng Jihong1Guo Aiqin1Yang Jiquan1Wang Haoliang2Liu Xun1
(1.Jiangsu Key Laboratory of 3D Printing Equipment and Manufacturing,Nanjing Normal University,Nanjing 210042,China)(2.Jiangsu Yuandong Motor Manufacturing Co.,Ltd,Taizhou 225500,China)
关键词:
金属粉末三维打印数字微喷三维喷墨打印UV光固化
Keywords:
three dimensional printing of metal powderdigital micro injectionthree dimensional inkjet printingUV light curing
分类号:
TP204
DOI:
10.3969/j.issn.1672-1292.2017.03.001
文献标志码:
A
摘要:
金属三维打印能够实现复杂功能零件直接制造与净近成型,具有广阔的应用前景和重要的研究价值. 在高精度金属三维打印领域目前以选择性激光烧结(SLS)工艺为主,但由于选择性激光烧结工艺的设备成本高、模型成型时间长、金属粉末材料选择范围窄等原因,限制了其应用范围. 本文提出一种“基于数字微喷与UV光固化相结合的金属粉末三维打印”实现方法,开发出一套完整的硬件平台与软件系统,并进行了相关的实验,验证了工艺的可行性和开发系统的可靠性. 该方法为金属三维打印提供了新的实现方法,具有较高的研究价值和意义.
Abstract:
Metal printing can realize the direct manufacturing and near net forming of complex functional parts,which has a wide application and an important research value. In the field of high precision 3D metal printing,selective laser sintering(SLS)is the main technology. However because of the high cost of the selective laser sintering process,the long molding time and the narrow range of the metal powder material,the application of this technology is limited. This paper presents a new method of 3D printing of metal powder based on digital micro jet and UV light curing,and develops a complete hardware platform and software system. Experiments are carried out to verify the feasibility and reliability of the system. The method for 3D metal printing provides a new method,which has the relatively high research value and significance.

参考文献/References:

[1] 杨继全,郑梅,杨建飞,等. 3D打印技术导论[M]. 南京:南京师范大学出版社,2016:1-16.
YANG J Q,ZHENG M,YANG J F,et al. Introduction to 3D Printing Technology[M]. Nanjing:Nanjing Normal University Press,2016:1-16.(in Chinese)
[2]ROMBOUTS M,KRUTH J P,FROYEN L,et al. Fundamentals of selective laser melting of alloyed steel powders[J]. CIRP annals-manufacturing technology,2006,55(1):187-192.
[3]顾冬冬. 激光烧结铜基合金的关键工艺及基础研究[D]. 南京:南京航空航天大学,2007.
GU D D. Key process and basic research of laser sintering copper based alloy[D]. Nanjing:Nanjing University of Aeronautics and Astronautics,2007.(in Chinese).
[4]刘秀梅,徐志锋. 选区激光烧结在航空件铸造中的应用[J]. 金属加工(热加工),2010(13):19-22.
LIU X M,XU Z F. Application of selective laser sintering in aviation parts casting[J]. MW metal forming,2010(13):19-22.(in Chinese).
[5]深圳市模具技术学会. 3D Systems发布新型高精度,高效金属打印设备ProXTM DMP 320[J]. 模具制造,2016(2):34-35.
SHENZHEN DIE & MOLO TECHNOLOGY SOCIETY. 3D Systems released a new high-precision,highly efficient metal printing equipment ProXTM DMP 320[J]. Die and mould manufacture,2016(2):34-35.(in Chinese).
[6]朱天柱. 压电式喷射三维打印成型系统开发与实验研究[D]. 武汉:华中科技大学,2012.
ZHU T Z. Development and experimental research of piezoelectric jet 3D printing system[D]. Wuhan:Huazhong University of Science and Technology,2012.(in Chinese).
[7]李飞. 三维喷射打印技术(3DP)在铸造行业的应用[C]//2016重庆市铸造年会论文集. 重庆,2016:1-4.
LI F. Application of three dimensional jet printing technology(3DP)in foundry industry[C]//Proceedings of the 2016 Annual Meeting of Chongqing Foundry. Chongqing,2016:1-4.(in Chinese).
[8]杨永泉,刘文辉,金天拾. 喷墨砂型三维打印技术在发动机缸体试制上的应用[C]//2014中国铸造活动周论文集. 北京:中国机械工程学会,2014:1-6.
YANG Y Q,LIU W H,JIN T S. Three-dimensional inkjet printing technology of sand is applied in engine cylinder[C]//Proceedings of 2014 China Foundry Week. Beijing:Chinese Mechanical Engineering Society,2014:1-6.(in Chinese)
[9]LI S,CHEN W,LIU F,et al. NN-GA based printing parameters optimization for 3DP[C]//IEEE international symposium on assembly and manufacturing. Xi’an,2013:160-162.
[10]尹亚楠. 数字微喷光固化三维打印成型装置设计与试验[D]. 南京:南京师范大学,2015:16-24.
YIN Y N. Design and experiment of digital micro injection curing 3D printing device[D]. Nanjing:Nanjing Normal University,2015:16-24.(in Chinese)
[11]夏俊,杨继全. 彩色三维打印机控制系统的开发[J]. 南京师范大学学报(工程技术版),2009,9(2):8-12.
XIA J,YANG J Q. Development of control system for color 3D printer[J]. Journal of Nanjing normal university(engineering and technology edition),2009,9(2):8-12.(in Chinese)

相似文献/References:

[1]刘 训,杨建飞,邱 鑫,等.基于数字微喷的电路板高精度封装方法研究[J].南京师范大学学报(工程技术版),2018,18(02):036.[doi:10.3969/j.issn.1672-1292.2018.02.005]
 Liu Xun,Yang Jianfei,Qiu Xin,et al.Research on the Method of Circuit Board PackagingBased on Digital Micro Injection[J].Journal of Nanjing Normal University(Engineering and Technology),2018,18(03):036.[doi:10.3969/j.issn.1672-1292.2018.02.005]

备注/Memo

备注/Memo:
收稿日期:2017-03-10.
基金项目:江苏省政策引导类计划(产学研合作)——前瞻性联合研究项目(BY2016001-01)、南京师范大学青蓝工程(184080H10371).
通讯联系人:杨建飞,副教授,研究方向:三维打印. E-mail:631056602@qq.com
更新日期/Last Update: 2017-09-30