[1]李昊洋,邱 鑫,杨继全,等.基于多传感器的直立循迹智能车硬件系统设计[J].南京师范大学学报(工程技术版),2017,17(04):020.[doi:10.3969/j.issn.1672-1292.2017.04.004]
 Li Haoyang,Qiu Xin,Yang Jiquan,et al.Hardware Design of Upright Tracking Smart VehicleBased on Multiple Sensors[J].Journal of Nanjing Normal University(Engineering and Technology),2017,17(04):020.[doi:10.3969/j.issn.1672-1292.2017.04.004]
点击复制

基于多传感器的直立循迹智能车硬件系统设计
分享到:

南京师范大学学报(工程技术版)[ISSN:1006-6977/CN:61-1281/TN]

卷:
17卷
期数:
2017年04期
页码:
020
栏目:
电气与电子工程
出版日期:
2017-12-30

文章信息/Info

Title:
Hardware Design of Upright Tracking Smart VehicleBased on Multiple Sensors
文章编号:
1672-1292(2017)04-0020-05
作者:
李昊洋邱 鑫杨继全沈世斌
南京师范大学江苏省三维打印装备与制造重点实验室,江苏 南京 210042
Author(s):
Li HaoyangQiu XinYang JiquanShen Shibin
Jiangsu Key Laboratory of 3D Printing Equipment and Manufacturing,Nanjing Normal University,Nanjing 210042,China
关键词:
自平衡循迹智能车多传感器
Keywords:
self-balancingtrackingsmart vehiclemultiple sensors
分类号:
TP242
DOI:
10.3969/j.issn.1672-1292.2017.04.004
文献标志码:
A
摘要:
本文介绍了一种基于面阵CMOS传感器、陀螺仪及加速度传感器和绝对式旋转编码器的直立循迹智能车硬件结构及设计方法. 该智能车采用模块化设计思想,将硬件电路划分为多个子模块,对其分别设计再予以综合. 其中姿态采集模块通过MPU6050运动传感器获取角度和角加速度数据,进而拟合得到智能车姿态,图像采集模块通过MT9V022 CMOS传感器获取道路图像信息,速度采集模块通过绝对式旋转编码器采集车速信息,最终通过CPU控制模块对上述信息综合分析,实现智能车直立且自主循迹的稳定运行控制.
Abstract:
This paper introduces the hardware structure design process of an upright tracking smart vehicle using array CMOS image sensor,gyro accelerometer sensor and absolute rotary encoder. With the modulation design concept,this hardware is divided into multiple sub-modules,each of which is designed respectively and then integrated. The attitude collecting module extracts the angle and angular acceleration dates using the MPU6050 motion sensor,and the vehicle attitude is fitting calculated with these data. Road image information is collected by MT9V022 camera for automatic tracking,and the vehicle speed is calculated with the absolute rotary encoder. These data of multi-sensors are analyzed synthetically in CPU control module to achieve the upright tracking and stable operation.

参考文献/References:

[1] 黄振邦,吴森. 混合动力电动汽车研究开发及前景展望[J]. 城市车辆,2007(7):43-45.
HUANG Z B,WU S. Research and development of hybrid electric vehicles and their prospects[J]. Urban vehicles,2007(7):43-45.(in Chinese)
[2]刘二林,姜香菊. 基于卡尔曼滤波的两轮自平衡车姿态检测[J]. 自动化与仪器仪表,2015(2):52-54.
LIU E L,JIANG X J. Self-balanced two-wheeled vehicle attitude detection based on Kalman filter[J]. Automation and instrumentation,2015(2):52-54.(in Chinese)
[3]陈永东,陈万米. 基于自主循迹平衡车的前瞻自适应系统设计[J]. 控制工程,2017,24(1):83-86.
CHEN Y D,CHEN W M. Design of preview adaptive system based on autonomous tracking balanced car[J]. Control engineering of China,2017,24(1):83-86.(in Chinese)
[4]高正中,龚群英,宋森森. 基于STM32 的智能平衡车控制系统设计[J]. 现代电子技术,2016,39(14):46-48.
GAO Z Z,GONG Q Y,SONG S S. Design of STM32-based control system for intelligent balanced vehicle[J]. Modern electronics technique,2016,39(14):46-48.(in Chinese)
[5]乔亮,王建军. 基于DMA技术单片机数字摄像头图像采集系统设计[J]. 机械与电子,2015(9):40-43.
QIAO L,WANG J J. Digital camera image acquisition system design based on DMA technology[J]. Machinery and electronics,2015(9):40-43.(in Chinese)
[6]王伟,陈慧,刁增祥,等. 基于光电导航无人驾驶电动汽车自动寻迹控制系统研究[J]. 汽车工程,2008,30(2):137-140.
WANG W,CHEN H,DIAO Z X,et al. Investigation into automatic path tracking control system of autonomous electric vehicle based on photoelectric navigation[J]. Automotive engineering,2008,30(2):137-140.(in Chinese)
[7]许家群. 电动汽车用永磁同步电动机传动控制系统的研究[D]. 沈阳:沈阳工业大学,2003.
XU J Q. Study on permanent magnet synchronous motor drive system in electric vehicle application[D]. Shenyang:Shenyang University of Technology,2003.(in Chinese)
[8]JIANG W,JIANG X. Design of an intelligent temperature control system based on the fuzzy self-tuning PID[J]. Procedia engineering,2012,43:307-311.
[9]MIAO-MIAO W U,SHEN S B,WANG L,et al. Design of up-right vehicle tracking system based on CMOS camera[J]. Techniques of automation and applications,2014.

备注/Memo

备注/Memo:
收稿日期:2017-03-14.
基金项目:江苏省高校自然科学基金(15KJB470010)、国家自然科学基金青年科学基金(51607094).
通讯联系人:邱鑫,博士,讲师,研究方向:永磁电机及控制、三维打印装备. E-mail:qiuxin_nh@163.com
更新日期/Last Update: 2017-12-30