[1]吕 弘,陈 旸,袁心悦,等.基于谐振模型的某GPS电路板仿真分析[J].南京师范大学学报(工程技术版),2018,18(04):013.[doi:10.3969/j.issn.1672-1292.2018.04.003]
 Lü Hong,Chen Yang,Yuan Xinyue,et al.Resonance Mode Simulation of a GPS PCB[J].Journal of Nanjing Normal University(Engineering and Technology),2018,18(04):013.[doi:10.3969/j.issn.1672-1292.2018.04.003]
点击复制

基于谐振模型的某GPS电路板仿真分析
分享到:

南京师范大学学报(工程技术版)[ISSN:1006-6977/CN:61-1281/TN]

卷:
18卷
期数:
2018年04期
页码:
013
栏目:
电气与电子工程
出版日期:
2018-12-30

文章信息/Info

Title:
Resonance Mode Simulation of a GPS PCB
文章编号:
1672-1292(2018)04-0013-06
作者:
吕 弘1陈 旸1袁心悦2陈紫薇2冯月贵3颜 伟2
(1.南京模拟技术研究所,江苏 南京 210016)(2.南京师范大学南瑞电气与自动化学院,江苏 南京 210042)(3.南京市特种设备安全监督检验研究院,江苏 南京 210019)
Author(s):
Lü Hong1Chen Yang1Yuan Xinyue2Chen Ziwei2Feng Yuegui3Yan Wei2
(1.Nanjing Research Institute on Simulation Technique,Nanjing 210016,China)(2.School of Electrical and Automation Engineering,Nanjing Normal University,Nanjing 210042,China)(3.Nanjing Special Equipment Safety Supervision and Inspection Research Institute,Nanjing 210019,China)
关键词:
电磁兼容SIwave谐振去耦电容
Keywords:
EMCSIwaveresonancedecoupling capacitance
分类号:
V249
DOI:
10.3969/j.issn.1672-1292.2018.04.003
文献标志码:
A
摘要:
PCB设计仿真是提高电子设备电磁兼容性能十分有成效的方法,为减小电源/地平面间高频谐振阻抗对电路带来的危害,本文采用电路板级仿真软件SIwave对某GPS电路板进行谐振仿真. 从频域角度分析板间谐振及对应频点的电压分布,比较优化前和优化后的仿真结果,从而改善PCB的电磁兼容性.
Abstract:
PCB design and simulation is an effective way to improve the electromagnetic compatibility of electronic equipment. Based on the SIwave software,one GPS PCB structure mode for resonance is established for reducing the harm caused by the high frequency resonance impedance of the power supply to the ground plane. In frequency domain,the resonant frequency and the voltage between multilayer PCB are analyzed in this paper. To promote EMC,simulation of initial result and improving one are compared.

参考文献/References:

[1] HUANG C H,WU T L. Analytical design of via lattice for ground planes noise suppression and application on embedded planar EBG structures[J]. IEEE transactions on components packaging & manufacturing technology,2013,3(1):21-30.
[2]LI J B,SHI Y J,NIU Z X,et al. Modeling,simulation and optimization design of PCB planar transformer[C]//Eighth International Conference on Electrical Machines and Systems,Nanjing,2005.
[3]朱明俊,李建兵,仝博宾,等. PCB平面谐振电感的损耗分析和优化设计[J]. 信息工程大学学报,2018,19(1):1-4.
ZHU M J,LI J B,TONG B B,et al. Loss analysis and design optimization of PCB planar resonant inductance[J]. Journal of information engineering university,2018,19(1):1-4.(in Chinese)
[4]孙海峰,张博,梁贵书. 模块化多电平换流器子模块电源完整性与电磁兼容仿真研究[J]. 华北电力大学学报(自然科学版),2016,43(3):9-15.
SUN H F,ZHANG B,LIANG G S. Simulation research on power integrity of MMC’s sub-module and electromagnetic compatibility[J]. Journal of North China electric power university(natural science edition),2016,43(3):9-15.(in Chinese)
[5]沈敏,吴明赞,李竹. 基于有限元方法的ARM11核心板电源完整性分析[J]. 电子器件,2013,36(4):568-571.
SHEN M,WU M Z,LI Z. Signal integrity analysis of ARM11 core board based on FEM[J]. Chinese journal of electron devices,2013,36(4):568-571.(in Chinese)
[6]冯利民,钱照明. 电源去耦方式对数字电路板级EMC性能的影响[J]. 电工技术学报,2007,22(4):14-20.
FENG L M,QIAN Z M. Influence of decoupling approach of power network on EMC performance of digital PCB[J]. Transactions of China electrotechnical society,2007,22(4):14-20.(in Chinese)
[7]OKOSHI T. Planar Circuits for Microwaves and Lightwaves[M]. Berlin:Springer-Verlag,1985.
[8]麻勤勤,石和荣,孟宏峰. 基于SIwave和Designer的差分过孔仿真分析[J]. 电子测量技术,2016,39(1):40-44,53.
MA Q Q,SHI H R,MENG H F. Simulation and analysis of differential via based on SIwave and Designer[J]. Electronic measurement technology,2016,39(1):40-44,53.(in Chinese)

相似文献/References:

[1]邓凌翔,封志明,陈道升,等.一种电子计量设备电磁兼容性分析与研究[J].南京师范大学学报(工程技术版),2011,11(01):005.
 Deng Lingxiang,Feng Zhiming,Chen Daosheng,et al.Electromagnetic Compatibility Analysis and Research of Electronic Measurement Equipment[J].Journal of Nanjing Normal University(Engineering and Technology),2011,11(04):005.
[2]赵 阳,颜 伟,罗永超,等.多功能吉赫兹横电磁波小室设计[J].南京师范大学学报(工程技术版),2010,10(01):001.
 Zhao Yang,Yan Wei,et al.Design of Multifunctional Giga Hertz Transverse Electromagnetic Cell[J].Journal of Nanjing Normal University(Engineering and Technology),2010,10(04):001.
[3]赵阳,See Kye Yak.传导性电磁干扰信号模态识别网络特性研究[J].南京师范大学学报(工程技术版),2002,02(04):026.
 Zhao Yang,See Kye Yak.Mode Discrimination Network Research for Conductive EMI Emission[J].Journal of Nanjing Normal University(Engineering and Technology),2002,02(04):026.
[4]陈道升,邓凌翔,周 雷,等.全波算法在电快速脉冲群测试中的应用[J].南京师范大学学报(工程技术版),2013,13(01):007.
 Chen Daosheng,Deng Lingxiang,Zhou Lei,et al.Full-Wave Algorithm Applied to EFT Test[J].Journal of Nanjing Normal University(Engineering and Technology),2013,13(04):007.
[5]安靖婕,陈 旸,张露妍,等.基于FIT的外壳开孔屏蔽性能仿真计算[J].南京师范大学学报(工程技术版),2014,14(01):007.
 An Jingjie,Chen Yang,Zhang Luyan,et al.Shielding Efficiency Simulation of Aperture in an Enclosure Based on FIT[J].Journal of Nanjing Normal University(Engineering and Technology),2014,14(04):007.
[6]孙红艳,赵 阳,周 敏.复杂医疗电子设备辐射干扰技术研究[J].南京师范大学学报(工程技术版),2015,15(03):024.
 Sun Hongyan,Zhao Yang,Zhou Min.Research Radiated Interference Technology ofComplex Medical Electronic Equipment[J].Journal of Nanjing Normal University(Engineering and Technology),2015,15(04):024.
[7]陈 旸,许 鸣,张孙虎,等.阻尼正弦瞬变传导抗扰度的校准实验研究[J].南京师范大学学报(工程技术版),2015,15(03):035.
 Chen Yang,Xu Ming,Zhang Sunhu,et al.The Calibration Experiment Research on the Damped SinusoidalTransients Conducted Susceptibility[J].Journal of Nanjing Normal University(Engineering and Technology),2015,15(04):035.
[8]陈向阳,杨 雄,周孟夏,等.一种静电问题处理方法分析与应用[J].南京师范大学学报(工程技术版),2016,16(02):035.[doi:10.3969/j.issn.1672-1292.2016.02.006]
 Chen Xiangyang,Yang Xiong,Zhou Mengxia,et al.Analysis and Application of an Electrostatic Problem[J].Journal of Nanjing Normal University(Engineering and Technology),2016,16(04):035.[doi:10.3969/j.issn.1672-1292.2016.02.006]
[9]吴 斌,陶 卫,张 涛,等.基于集中抄表的静电放电问题的分析与应用[J].南京师范大学学报(工程技术版),2016,16(03):010.[doi:10.3969/j.issn.1672-1292.2016.03.002]
 Wu Bin,Tao Wei,Zhang Tao,et al.Analysis and Application of the Electrostatic Discharge ProblemBased on a Centralized Meter Reading[J].Journal of Nanjing Normal University(Engineering and Technology),2016,16(04):010.[doi:10.3969/j.issn.1672-1292.2016.03.002]
[10]桑 健,赵 阳,高 翔,等.基于结构处理的电子设备ESD防护方法研究[J].南京师范大学学报(工程技术版),2017,17(04):001.[doi:10.3969/j.issn.1672-1292.2017.04.001]
 Sang Jian,Zhao Yang,Gao Xiang,et al.Research on Electrostatic Discharge Protection Method ofElectronic Equipment Based on Structure Processing[J].Journal of Nanjing Normal University(Engineering and Technology),2017,17(04):001.[doi:10.3969/j.issn.1672-1292.2017.04.001]

备注/Memo

备注/Memo:
收稿日期:2018-09-07.
通讯联系人:颜伟,博士,讲师,研究方向:电磁场. E-mail:61197@njnu.edu.cn
更新日期/Last Update: 2018-12-30