[1]陈向阳,陈 旸,刘 勇,等.电流驱动共模模型对辐射噪声预估及校准研究[J].南京师范大学学报(工程技术版),2013,13(03):023-26.
　Chen Xiangyang,Chen Yang,Liu Yong,et al.Prediction and Calibration With Current-Driven CM Model Study of Radiated Electromagnetic Inference Noise[J].Journal of Nanjing Normal University(Engineering and Technology),2013,13(03):023-26.
点击复制

电流驱动共模模型对辐射噪声预估及校准研究
分享到：

南京师范大学学报（工程技术版）[ISSN:1006-6977/CN:61-1281/TN]

卷:
13卷
期数:
2013年03期
页码:
023-26
栏目:
出版日期:
2013-09-30

文章信息/Info

Title:
Prediction and Calibration With Current-Driven CM Model Study of Radiated Electromagnetic Inference Noise
作者:
陈向阳1; 陈 旸2; 刘 勇2; 夏 欢2
(1.江苏省产品质量监督检验研究院,江苏 南京 210007) (2.南京师范大学电气与自动化工程学院,江苏 南京 210042)
Author(s):
Chen Xiangyang1; Chen Yang2; Liu Yong2; Xia Huan2
(1.Institute of Product Quality Supervision and Inspection in Jiangsu Province,Nanjing 210007,China) (2.School of Electrical and Automation Engineering,Nanjing Normal University,Nanjing 210042,China)
关键词:
电磁干扰; 电流驱动共模模型; 方差拟合
Keywords:
electromagnetic interference(EMI); current-driven common-mode model; variance fitting
分类号:
TM15
文献标志码:
A
摘要:
开阔场测试、电波暗室测试和近场测量是目前用于测量辐射电磁噪声的主要手段,但是考虑到成本原因,对辐射噪声的预估往往采用近场测量.美国克莱姆森大学的Hubing教授提出的电流驱动共模模型可以对辐射噪声进行预估.如加之方差的拟合校准,可以对数据进行补偿.结果证明了以上方法可以为进一步改进辐射电磁干扰预估方法提供借鉴.
Abstract:
OTA test,3-m chamber measurement and near field test are all made useful to prediction research on radiated electromagnetic inference noise.Because of high cost, near field test maybe adopted to estimate the radiation noise.Hubing from Clemson University put forward a simple configuration illustrating current-driven common-mode radiation.This paper makes use of variance to compensate the data.The result shows that current-driven common-mode radiation algorithm and variance are avail to high frequency radiated interference’s estimation and the diagnosis work.

参考文献/References:

[1] Aouine O,Labarre C,Costa F.Measurement and modeling of the magnetic near field radiated by a Buck chopper[J].Electromagnetic Compatibility,IEEE Transactions on,2008,50(2):445-449.
[2]Xin Tong,Thomas D W P,Nothofer A,et al.Modeling electromagnetic emissions from printed circuit boards in closed environments using equivalent dipoles[J].Electromagnetic Compatibility,IEEE Transactions on,2010,52(2):462-470.
[3]Shim H,Hubing T.A closed-form expression for estimating radiatedemissions from the power planes in a populated printed circuit board[J].IEEE Trans Electromagn Compat,2006,48(1):74-81.
[4]Fu Yan,Hubing T H.Analysis of radiated emissions from a printed circuit board using expert system algorithms[J].IEEE Transaction on Electromagnetic Compatibility,2007,49(1):68-75.
[5]Shim H,Hubing T.Model for estimating radiated emissions from a printed circuit board with attached cables due to voltage-driven sources[J].IEEE Trans EMC,2005,47(4):899-907.
[6]Shim H,Fu Y,Hubing T H.Radiated emissions from populated printed circuit boards due to power bus noise[C]//Proc IEEE Int Symp EMC,Santa Clara:2004:396-400.
[7]孙红艳,刘勇,颜伟,等.辐射电磁干扰近场测试校准算法研究[J].南京师范大学学报:工程技术版,2011,11(3):6-9.
Sun Hongyan,Liu Yong,Yan Wei,et al.The research on radiated electromagnetic interference near field test calibration algorithm[J].Journal of Nanjing Normal University:Engineering and Technology Edition,2011,11(3):6-9.(in Chinese)
[8]刘健,杨文宇,赵高长.基于蒙特卡罗分析的配电网架规划方法比较[J].中国电机工程学报,2006,26(10):73-78.
Liu Jian,Yang Wenyu,Zhao Gaochang.Comparison of expansion planning alogithms for distribution networks based on monte-carlo simulation[J].Proceedings of the CSEE,2006,26(10):73-78.(in Chinese)

相似文献/References:

[1]周雷,陈旸,邓凌翔,等.基于CST的抗扰度测试环境辐射电磁场仿真[J].南京师范大学学报(工程技术版),2012,12(03):018.
　Zhou Lei,Chen Yang,Deng Lingxiang,et al.Radiated Electromagnetic Field in an EMS Test Environment Based on CST[J].Journal of Nanjing Normal University(Engineering and Technology),2012,12(03):018.
[2]张宇环,赵阳,刘勇,等.辐射电磁干扰噪声预估方法校准研究[J].南京师范大学学报(工程技术版),2012,12(03):023.
　Zhang Yuhuan,Zhao Yang,Liu Yong,et al.Prediction Research on Radiated Eletromagnetic Inference Noise Using Calibration Method[J].Journal of Nanjing Normal University(Engineering and Technology),2012,12(03):023.
[3]张宇环,戎融,赵阳,等.PCB高频辐射干扰预估方法对比研究[J].南京师范大学学报(工程技术版),2011,11(01):001.
　Zhang Yuhuan,Rong Rong,Zhao Yang,et al.Comparison of Prediction Methods Applied in High Frequency Radiated EMI for PCB[J].Journal of Nanjing Normal University(Engineering and Technology),2011,11(03):001.
[4]姜宁秋,赵阳.驱动噪声对开关电源传导EMI的影响[J].南京师范大学学报(工程技术版),2011,11(03):001.
　Jiang Ningqiu,Zhao Yang,The Influence of the Drive Noise on the Conducted EMI of SMPS[J].Journal of Nanjing Normal University(Engineering and Technology),2011,11(03):001.
[5]赵阳,姜宁秋,孙焱,等.传导电磁干扰噪声分离网络性能的理论研究[J].南京师范大学学报(工程技术版),2008,08(03):001.
　Zhao Yang,Jiang Ningqiu,Sun Yan,et al.Theoretical Research on Capability of Noise Separator for Conducted EMI Noise[J].Journal of Nanjing Normal University(Engineering and Technology),2008,08(03):001.
[6]沈雪梅,赵阳,李世锦,等.传导性EMI噪声的智能处理及参数建模研究[J].南京师范大学学报(工程技术版),2006,06(04):011.
　SHEN Xuemei,ZHAO Yang,LI Shijin,et al.Intellectual System of Conducted EMI Noise and its Parameter-Modeling[J].Journal of Nanjing Normal University(Engineering and Technology),2006,06(03):011.
[7]沈雪梅,赵阳,李世锦,等.传导性电磁干扰噪声分离网络识别特性的实验与仿真研究[J].南京师范大学学报(工程技术版),2005,05(03):016.
　SHEN Xuemei,ZHAO Yang,LI Shijin,et al.Experiment and Simulation Investigation on Performance of Discrimination Networks for Conductive Electromagnetic Noise[J].Journal of Nanjing Normal University(Engineering and Technology),2005,05(03):016.
[8]马鸿娟,涂新奇,贾寅森,等.变电站4G传输安全电磁干扰研究[J].南京师范大学学报(工程技术版),2019,19(04):038.[doi:10.3969/j.issn.1672-1292.2019.04.007]
　Ma Hongjuan,Tu Xinqi,Jia Yinsen,et al.Research on Safety Electromagnetic Interference of4G Transmission in Substation[J].Journal of Nanjing Normal University(Engineering and Technology),2019,19(03):038.[doi:10.3969/j.issn.1672-1292.2019.04.007]

备注/Memo

备注/Memo:
收稿日期:2013-05-27.
通讯联系人:陈向阳,高级工程师,研究方向:电子、电器产品质量检验.E-mail:cxyij@sina.com.cn
更新日期/Last Update: 2013-09-30