[1]宋 奇,李 超,刘宸宇.垂直轴风力机中马格纳斯效应力最大化与叶片转速的研究[J].南京师范大学学报(工程技术版),2019,19(01):065.[doi:10.3969/j.issn.1672-1292.2019.01.009]
 Song Qi,Li Chao,Liu Chenyu.Research on the Relationship Between the Maximal Magnus Forceand Blade Rotation of Wheel-Track Wind Turbine[J].Journal of Nanjing Normal University(Engineering and Technology),2019,19(01):065.[doi:10.3969/j.issn.1672-1292.2019.01.009]
点击复制

垂直轴风力机中马格纳斯效应力最大化与叶片转速的研究
分享到:

南京师范大学学报(工程技术版)[ISSN:1006-6977/CN:61-1281/TN]

卷:
19卷
期数:
2019年01期
页码:
065
栏目:
机械工程
出版日期:
2019-03-30

文章信息/Info

Title:
Research on the Relationship Between the Maximal Magnus Forceand Blade Rotation of Wheel-Track Wind Turbine
文章编号:
1672-1292(2019)01-0065-07
作者:
宋 奇李 超刘宸宇
南京师范大学能源与机械工程学院,江苏 南京 210042
Author(s):
Song QiLi ChaoLiu Chenyu
School of Energy and Mechanical Engineering,Nanjing Normal University,Nanjing 210042,China
关键词:
马格纳斯效应垂直轴风力机转子叶片控制跟随控制最大风能利用率
Keywords:
Magnus effectwheel-track vertical axis wind turbinerotor blade controlfollow controlmaximum wind power generation
分类号:
TK83
DOI:
10.3969/j.issn.1672-1292.2019.01.009
文献标志码:
A
摘要:
在基于马格纳斯力驱动的垂直轴风力机理论研究的基础上,研究了风场中旋转柱形叶片所能够获取最大马格纳斯力的方法. 从最大风能利用率和最低能耗角度出发,把叶片在风力机中所处动态方位角与叶片的合理旋转速度联系起来,提出了旋转叶片的最大功率跟随的叶片转速控制问题并进行系统研究,为马格纳斯力驱动的垂直轴风力机的控制和实际应用提供理论基础.
Abstract:
Based on the theoretical study of the wheel-track vertical axis wind turbine driven by Magnus force,this paper studies the method of obtaining the maximum Magnus force on the rotating cylindrical blade in the wind field,and from the maximum wind energy utilization rate and the lowest energy. From the perspective of maximum wind energy utilization and minimum energy consumption,the dynamic azimuth of the blade in the wind turbine is related to the reasonable rotational speed of the blade. This paper systematically studies blade rotation speed control of the maximum power of the rotating blade and provides a theoretical basis for the control and practical application of the vertical axis wind turbine driven by Magnus force.

参考文献/References:

[1] SPERA D A. Wind turbine technology:fundamental concepts of wind turbine engineering[M]. New York:ASME,1994.
[2]李岩. 垂直轴风力机及其发展概况[J]. 可再生能源,2009,27(1):121-123.
LI Y. Vertical axis wind turbine and its development[J]. Renewable energy resources,2009,27(1):121-123.(in Chinese)
[3]孙瑛. 垂直轴柱状叶片风力机的研究[D]. 哈尔滨:哈尔滨工业大学,2011.
SUN Y. Research on a new type of vertical axis wind turbines with cylindrical blades[D]. Harbin:Harbin Institute of Technology,2001.(in Chinese)
[4]庄月晴. Magnus效应作用下的风力机气动性能及流动控制的数值研究[D]. 上海:上海大学,2012.
ZHUANG Y Q. Numerical studies on the aerodynamic performance and flow control of the wind turbines with the Magnus effect[D]. Shanghai:Shanghai University,2012.(in Chinese)
[5]PADRINO J C,JOSEPH D D. Numerical study of the steady-state uniform flow past a rotating cylinder[J]. Journal of fluid mechanics,2006,557(557):191-223.
[6]MITTAL S. Flow past rotating cylinders:effect of eccentricity[J]. Journal of applied mechanics,2001,68(4):543-552.
[7]刘宸宇,李超. 马格纳斯力驱动的轮轨式风力发电机研究[J]. 南京师范大学学报(工程技术版),2018,18(1):41-46.
LIU C Y,LI C. Exploration of wheel-track wind turbine drived by magnus force[J].Journal of Nanjing normal university(engineering and technology edition),2018,18(1):41-46.(in Chinese)
[8]刘小云. 气固两相方柱绕流流动特性的PIV实验研究[D]. 杭州:浙江大学,2005.
LIU X Y. The experimental study of the characteristic of gas-solid two phases flow around square cylinders by PIV[D]. Hangzhou:Zhejiang University,2015.(in Chinese)
[9]吴望一. 流体力学[M]. 北京:北京大学出版社,2004.
WU W Y. Fluid mechanics[M]. Beijing:Peking University Press,2004.(in Chinese)
[10]高学平. 高等流体力学[M]. 天津:天津大学出版社,2005.
GAO X P. Advanced fluid mechanics[M]. Tianjin:Tianjin University Press,2005.(in Chinese)

相似文献/References:

[1]刘宸宇,李 超.马格纳斯力驱动的轮轨式风力发电机研究[J].南京师范大学学报(工程技术版),2018,18(01):041.[doi:10.3969/j.issn.1672-1292.2018.01.006]
 Liu Chenyu,Li Chao.Exploration of Wheel-track Wind Turbine Drived by Magnus Force[J].Journal of Nanjing Normal University(Engineering and Technology),2018,18(01):041.[doi:10.3969/j.issn.1672-1292.2018.01.006]

备注/Memo

备注/Memo:
收稿日期:2018-09-28.
通讯联系人:李超,教授,研究方向:机械电子工程、流体机械. E-mail:lichao@njnu.edu.cn
更新日期/Last Update: 2019-03-30