[1]张 晗,张海龙,马 云.基于PSSH电路的悬架系统馈能发电研究[J].南京师范大学学报(工程技术版),2022,22(03):021-29,62.[doi:10.3969/j.issn.1672-1292.2022.03.004]
　Zhang Han,Zhang Hailong,Ma Yun.Research on Suspension System Feeding Power Generation Based on PSSH Circuit[J].Journal of Nanjing Normal University(Engineering and Technology),2022,22(03):021-29,62.[doi:10.3969/j.issn.1672-1292.2022.03.004]
点击复制

基于PSSH电路的悬架系统馈能发电研究
分享到：

南京师范大学学报（工程技术版）[ISSN:1006-6977/CN:61-1281/TN]

卷:
22卷
期数:
2022年03期
页码:
021-29,62
栏目:
电气工程
出版日期:
2022-09-15

文章信息/Info

Title:
Research on Suspension System Feeding Power Generation Based on PSSH Circuit
文章编号:
1672-1292(2022)03-0021-09
作者:
张 晗; 张海龙; 马 云
(南京师范大学南瑞电气与自动化学院,江苏 南京 210023)
Author(s):
Zhang Han; Zhang Hailong; Ma Yun
(NARI School of Electrical and Automation Engineering,Nanjing Normal University,Nanjing 210023,China)
关键词:
馈能悬架; 能量回收; 直线电机; PSSH电路
Keywords:
regenerative suspensions; energy harvesting; linear machine; PSSH circuit
分类号:
TM13; TM35
DOI:
10.3969/j.issn.1672-1292.2022.03.004
文献标志码:
A
摘要:
车辆行驶时因路面不平整引起车身振动的能量,可通过悬架系统的阻尼以热能形式耗散. 为了提升车辆系统能源利用率,悬架振动能量回收技术越来越受到关注. 提出了一种针对直线电机的振动能量回收电路——并联同步开关能量回收(parallel synchronous switch harvesting,PSSH)电路,完成了该电路在恒定激振位移下回收功率的理论分析和计算. 对标准能量回收电路、并联同步开关能量回收电路进行仿真比较并进行实验验证. 结果表明,并联同步开关能量回收电路的回收功率与负载的变化无关且始终保持在较高的水平,具有优越的性能.
Abstract:
When the vehicle is running,the energy of the body vibration caused by the uneven road surface is dissipated in the form of heat energy through the damping of the suspension system in the past. In order to improve the energy utilization rate of the vehicle system,the suspension vibration energy recovery technology has attracted more and more attention. This paper proposes a vibration energy recovery circuit for linear motors,a parallel synchronous switch harvesting(PSSH)circuit,and completes the theoretical analysis and calculation of the circuit's recovery power under constant excitation displacement. The standard energy recovery circuit and the parallel synchronous switch energy recovery circuit are simulated and compared and verified by experiments. The results show that the recovered power of the parallel synchronous switching energy recovery circuit has nothing to do with the change of the load,that it always maintains a high level,and, that it has superior performance.

参考文献/References:

[1]BADEL A,LAGACHE M,GUYOMAR D,et al. Finite element and simple lumped modeling for flexural nonlinear semi-passive damping[J]. Journal of Intelligent Material Systems and Structures,2007,18(7):727-742.
[2]LAFARGE B,GRONDEL S,DELEBARRE C,et al. A validated simulation of energy harvesting with piezoelectric cantilever beams on a vehicle suspension using Bond Graph approach[J]. Mechatronics,2018,53:202-214.
[3]王戎,王铁,赵震,李蒙. 一种悬架系统压电能量回收装置的可行性研究[J]. 机械设计与制造,2021,42(12):33-37.
[4]WANG M,YIN P,LI Z,et al. Harnessing energy from spring suspension systems with a compressive-mode high-power-density piezoelectric transducer[J]. Energy Conversion and Management,2020,220:220-232.
[5]寇发荣,杜曼,马建,等. 电磁直线电机悬架馈能潜力与能量回收分析[J]. 机械科学与技术,2021,40(6):941-948.
[6]LIU Y,XU L,ZUO L. Design,modeling,lab,and field tests of a mechanical-motion-rectifier-based energy harvester using a ball-screw mechanism[J]. IEEE/ASME Transactions on Mechatronics,2017,22(5):1933-1943.
[7]SHU Y C,LIEN I C. Analysis of power output for piezoelectric energy harvesting systems[J]. Smart Materials and Structures,2006,15(6):1499.
[8]丁晓亮,沈辉,曲鹏超. 增强型双中间电容压电能量回收电路的优化设计[J]. 青岛大学学报(自然科学版),2021,34(1):54-58.
[9]FANG S,XIA H,XIA Y,et al. An efficient piezoelectric energy harvesting circuit with series-SSHI rectifier and FNOV-MPPT control technique[J]. IEEE Transactions on Industrial Electronics,2020,68(8):7146-7155.
[10]汪若尘,焦宇,钱金刚,等. 混合悬架半主动控制器设计与试验[J]. 农业机械学报,2017,48(6):334-340.
[11]ZHANG X,MI C. Vehicle power management:modeling,control and optimization[M]. London:Springer Science & Business Media,2011.
[12]BAGLIONE M,DUTY M,PANNONE G. Vehicle system energy analysis methodology and tool for determining vehicle subsystem energy supply and demand[R/OL]. SAE Technical Paper,2007. [2022-07-01]. http://doi.org/10.4271/2007-01-0398.
[13]SEGEL L,LU X. Vehicular resistance to motion as influenced by road roughness and highway alignment[J]. Australian road Research,1982,12(4):211-222.
[14]SMITH M C,SWIFT S J. Power dissipation in automotive suspensions[J]. Vehicle System Dynamics,2011,49(1):59-74.

备注/Memo

备注/Memo:
收稿日期:2022-04-01.
基金项目:江苏省自然科学基金青年项目(BK20171039).
通讯作者:张海龙,博士,副教授,研究方向:磁流变智能减振及电磁馈能技术研究. E-mail:61204@njnu.edu.cn
更新日期/Last Update: 2022-09-15