[1]窦一平.一种基于场路结合计算模型的步进电动机优化设计方法[J].南京师范大学学报(工程技术版),2003,03(03):011-15.
　Dou Yiping.Optimum Design Method on the Basis of the Calculation Model Combining Field with Circuit of Stepping Motor[J].Journal of Nanjing Normal University(Engineering and Technology),2003,03(03):011-15.
点击复制

一种基于场路结合计算模型的步进电动机优化设计方法
分享到：

南京师范大学学报（工程技术版）[ISSN:1006-6977/CN:61-1281/TN]

卷:
03卷
期数:
2003年03期
页码:
011-15
栏目:
出版日期:
2003-09-30

文章信息/Info

Title:
Optimum Design Method on the Basis of the Calculation Model Combining Field with Circuit of Stepping Motor
作者:
窦一平
南京师范大学电气与电子工程学院, 210042, 南京
Author(s):
Dou Yiping
College of Electrical and Electronic Engineering, Nanjing Normal University, 210042, Nanjing, PRC
关键词:
步进电动机;  优化设计;  场路结合
Keywords:
stepping motor;  optimum design method;  combination of field with circuit
分类号:
TM343
摘要:
提出一种步进电动机的优化设计方法 ,在步进电动机的场路结合计算模型基础上 ,采用正多面体的优化方法 ,对一台永磁感应子式步进电动机样机进行了齿层尺寸的优化设计 .计算和实测表明 ,此种方法适合于在工厂工程实际中应用
Abstract:
On the basis of the calculation model combining field with circuit of the stepping motor, an optimum design method has been presented in this paper. An optimum algorithm with regular polyhedron has been used in the method to design the size of the tooth layer unit of the prototype motor. The test and the calculation results show that the method can be applied to the engineering in the factory.

参考文献/References:

[ 1] 窦一平. 永磁感应子式步进电动机的场路结合计算法及其工程合理性[ J] . 南京师范大学学报( 工程技术版) , 2002,( 1) : 5~ 10.
[ 2] 哈尔滨工业大学, 成都电机厂. 步进电动机[M] . 北京: 科学出版社, 1979.

相似文献/References:

[1]于卫红.数控转塔冲床横梁结构的分析与优化设计[J].南京师范大学学报(工程技术版),2010,10(02):021.
　Yu Weihong.Analysis and Optimization for the Servo-Beam of A CNC Turret Punch Press[J].Journal of Nanjing Normal University(Engineering and Technology),2010,10(03):021.
[2]谢海燕,谢 勇,顾敏芬,等.无线激光打靶器系统建模与设计[J].南京师范大学学报(工程技术版),2005,05(01):068.
　X IE Haiyan,X IE Yong,GU M infen,et al.Modeling and Design of a New Laser Target Practice System[J].Journal of Nanjing Normal University(Engineering and Technology),2005,05(03):068.
[3]窦一平.永磁感应子式步进电动机静特性的计算方法[J].南京师范大学学报(工程技术版),2003,03(02):041.
　Dou Yiping.On the Static Characteristic Calculation Model of Permanent Magnet Induction Stepping Motor[J].Journal of Nanjing Normal University(Engineering and Technology),2003,03(03):041.
[4]窦一平.永磁感应子式步进电动机的场路结合计算法及其工程合理性[J].南京师范大学学报(工程技术版),2002,02(01):005.
　Dou Yiping.On The Calculation Model and Its Engineering Rationality of Permanent Magnet Induction Stepping Motor[J].Journal of Nanjing Normal University(Engineering and Technology),2002,02(03):005.
[5]邓素萍,吴方.SPI串行总线与单片机系统的优化设计[J].南京师范大学学报(工程技术版),2002,02(03):050.
　Deng Subin,Wu Fan.SPI Serial Bus and Optimized Design of Microprocessor[J].Journal of Nanjing Normal University(Engineering and Technology),2002,02(03):050.

备注/Memo

备注/Memo:
基金项目: 江苏省教育厅自然科学研究基金资助项目( OOKJD47001) .
作者简介: 窦一平, 1964- , 工学博士, 南京师范大学电气与电子工程学院副教授, 主要从事特种电机的研究.
更新日期/Last Update: 2013-04-29