[1]徐亮,李超,陈玲,等.快速称重传感器在电池极板称重分拣系统中的应用[J].南京师范大学学报(工程技术版),2009,09(02):013-17.
　Xu Liang,Li Chao,Chen Ling.Application of Fast Weight-check Sensor in Accumulator Electrode Pads Weight Checking and Sorting System[J].Journal of Nanjing Normal University(Engineering and Technology),2009,09(02):013-17.
点击复制

快速称重传感器在电池极板称重分拣系统中的应用
分享到：

南京师范大学学报（工程技术版）[ISSN:1006-6977/CN:61-1281/TN]

卷:
09卷
期数:
2009年02期
页码:
013-17
栏目:
出版日期:
2009-06-30

文章信息/Info

Title:
Application of Fast Weight-check Sensor in Accumulator Electrode Pads Weight Checking and Sorting System
作者:
徐亮;李超;陈玲;
南京师范大学电气与自动化工程学院, 江苏南京210042
Author(s):
Xu Liang; Li Chao; Chen Ling
School of Electrical and Automation Engineering,Nanjing Normal University,Nanjing 210042,China
关键词:
传感器;  极板;  称重;  分拣
Keywords:
senso r;  pads;  w e ight-check;  so rting
分类号:
TP274
摘要:
针对电动自行车用蓄电池生产中需要根据其极板重量进行分拣的工艺要求,提出了一种极板快速称重分拣的方法,该方法利用无刚性冲击的间歇运动机构、快速数字式称重传感器、PLC控制器、气动上下料系统等手段,实现极板的自动化快速称重分选.重点讨论了该方法中最主要的部件:智能快速数字式称重传感器的工作原理、参数设置、滤波方式的选择、称重数据采集的触发方式与震荡时间的计算与设置等,有效地去除了由于分选机构的机械动作引起的机械振动以及工作现场的外界干扰对实际重量信号的淹没.以PLC作为智能传感器的上位控制器,完成了PLC与智能传感器的通讯,介绍了PLC对智能传感器的命令方式以及与控制器之间的数据交换、系统调试使用方法.
Abstract:
In the production o f accumu la tors used in e lectromo tion bicycles, pads a re needed to be sorted by w eight. A im ed at this wo rk procedure, th is paper g ives am ethod of fast we ight- check and so rting fo r pads. Th is auto fastw e ightcheck and sorting m e thod fo r pads makes use o f non- rig idity- im pac t in term ittent m otion structure, fast dig ita l sensor, PLC, and pneum a tic ma teria l sending system to rea lize the fast w e ight-check and sorting for pads . The pr im ary pa rts d iscussed here are the inte lligent fast d ig ita lw eight- check sensor, its wo rk pr incip le, param ete rs setting, choo sing o f fi-l tering m ode, spring mode of data-co llecting, and the ca lculation and setting of the concussion time. The sensor avo ids e ffectively the actual we ight signal flooded by m echanical v ibrations caused by sorting m otion, and the inter ference from environm ent. The last part o f this paper discussed the communication m ode betw een the senso r and the upper contro ller ( PLC), the comm and m ode and data exchange mode of PLC w ith the senso r, and the debugg ing o f the system.

参考文献/References:

[ 1] 赵忠芳, 黄开胜. 基于PLC的充电电池负极片自动称重分拣系统[ J]. 机电工程技术, 2008, 37( 3) : 78-80.
Zhao Zhong fang, Huang Ka isheng. E lec trification battery ca thode pads auto w e ight-check and so rting system based on PLC
[ J] . M echanica l and E lectr ica l Eng ineer ing Techno logy, 2008, 37( 3): 78-80. ( in Ch inese)
[ 2] 彭正雄. 自动称片机中极板的分类收集方法: 中国, 2005100410041 5[ P]. 2006-01-11.
Peng Zhengx iong. Pads so rting and co llectingm ethod in auto pads-check machine: China, No. 2005100410041 5[ P]. 2006-01-
11. ( in Ch inese)
[ 3] 李晓里. 称重分拣机: 中国, 20052002084314[ P]. 2006-07-26.
Li X iao l.i W e ight- check and so rting m ach ine: Ch ina, No. 2005200208431 4[ P]. 2006-07-26. ( in Chinese)
[ 4]朱子健. 基于先进数据处理技术的智能称重传感器研究[ D]. 南京: 南京航空航天大学, 2005.
Zhu Zijian. Research o f aptitudew e ight-check senso r based on advanced da ta processing techno logy [ D]. Nanjing: Nan jingUn
iversity o fA eronautics and Astronautics, 2005. ( in Ch inese)
[ 5] 李超. 电池极板并行快速称重分拣方法: 中国, 2007100211541 9[ P]. 2007-08-29.
Li Chao. B attery pads paralle l fast we ight- check and so rting m ethod: Ch ina, No. 2007100211541 9[ P]. 2007-08-29. ( in Ch-i
nese)
[ 6] 史国生. 电气控制与可编程控制器技术[M ]. 北京: 化学工业出版社, 2004.
Shi Guosheng. E lectric Contro l and Prog ramm eab le Controlle r Techno logy [M ]. Beijing: Chem istry Industry Press, 2004.
( in Chinese)
[ 7] 孙耀庭. 关于如何选用称重传感器的几点建议[ J] . 计量技术, 2001( 1): 53-54.
Sun Yao ting. Som e adv ises about how to se lect we ight- check senso r [ J ]. M easurem ent Techn ique, 2001 ( 1 ): 53-54.
( in Chinese)

相似文献/References:

[1]刘清.基于小波消噪的传感器动态补偿方法[J].南京师范大学学报(工程技术版),2004,04(02):033.
　LIU Qing.Dynamic Compensation Method for Sensor Based on Denoising by Wavelet Decomposition[J].Journal of Nanjing Normal University(Engineering and Technology),2004,04(02):033.
[2]陈敏.应用Matlab拟合传感器特性曲线[J].南京师范大学学报(工程技术版),2003,03(01):045.
　Chen Min.Application of Matlab to Fitting Sensor Characteristic Curves[J].Journal of Nanjing Normal University(Engineering and Technology),2003,03(02):045.
[3]顾志华,戈惠梅,徐晓慧,等.基于多传感器的智能小车避障系统设计[J].南京师范大学学报(工程技术版),2014,14(01):012.
　Gu Zhihua,Ge Huimei,Xu Xiaohui,et al.Design of an Avoidance System on the Intelligent Vehicle Based on Multi-Sensors[J].Journal of Nanjing Normal University(Engineering and Technology),2014,14(02):012.
[4]石家凤,万 汨,臧垲岳,等.基于智能手机传感器数据的道路平整度实时观测APP设计[J].南京师范大学学报(工程技术版),2018,18(02):077.[doi:10.3969/j.issn.1672-1292.2018.02.011]
　Shi Jiafeng,Wan Mi,Zang Kaiyue,et al.Real-Time Observation APP Design of Road RoughnessBased on Smartphone’s Sensor Data[J].Journal of Nanjing Normal University(Engineering and Technology),2018,18(02):077.[doi:10.3969/j.issn.1672-1292.2018.02.011]

备注/Memo

备注/Memo:
通讯联系人: 李 超, 教授, 研究方向: 机电一体化工程. E-m ail: l ichao@ n jnu. edu. cn
更新日期/Last Update: 2013-04-23