[1]王宪菊.用于工业窑炉的多路远程温控系统设计[J].南京师范大学学报(工程技术版),2012,12(03):027-30.
　Wang Xianjü.Design of Multi-Channel and Remote Temperature Control System Used in Industrial Furnace[J].Journal of Nanjing Normal University(Engineering and Technology),2012,12(03):027-30.
点击复制

用于工业窑炉的多路远程温控系统设计
分享到：

南京师范大学学报（工程技术版）[ISSN:1006-6977/CN:61-1281/TN]

卷:
12卷
期数:
2012年03期
页码:
027-30
栏目:
出版日期:
2012-09-20

文章信息/Info

Title:
Design of Multi-Channel and Remote Temperature Control System Used in Industrial Furnace
作者:
王宪菊;
阜阳师范学院物理与电子科学学院，安徽阜阳236041
Author(s):
Wang Xianjü
Department of Physics and Electronics,Fuyang Teachers College,Fuyang 236041,China
关键词:
K 型热电偶; ASCII 码串口通讯协议; 温度测控系统
Keywords:
Type-K thermocouple; ASCII serial communication protocol; temperature measurement and control system
分类号:
TP273
摘要:
针对工业窑炉对温度的严格要求,设计了一种基于K型热电偶的可远程监控的8路温度采集与控制系统.该系统由上下位机两部分组成.PC机作为上位机,采用组态软件编写可视化界面,对工业现场温度实现远程监控.以STC89C52为核心的单片机作为下位机,根据上位机发送的指令执行相应的动作.实验结果表明,该系统测温范围大,测温精度高,稳定性好,易于扩展,能很好地满足工业窑炉温控需求.
Abstract:
According to strict requirements of industrial furnace temperature，the paper designs an eight temperature acquisition and control system who can be remotely monitored based on type-K thermocouple． This system is composed of master machine and a slaver machine． PC is master machine whose visual interface is written by configuration software， and can remotely monitor temperature of the industrial locale． A slaver machine whose core is STC89C52 SCM executes a corresponding action． Experimental results show that this system has wider measuring temperature range，higher temperature measurement precision，better stability and easy extensibility and can meet industry kiln needs of temperature control．

参考文献/References:

［1］王魁汉． 温度测量实用技术［M］． 北京: 机械工业出版社， 2006: 13-14． Wang Kuihan． Temperature Measurement Practical Technology［M］． Beijing: China Machine Press， 2006: 13-14． ( in Chinese)
［2］高智慧，刘学平，占涛． 基于K 型热电偶的多路温控系统的研究［J］． 机械设计与制造，2011( 4) : 7-9． Gao Zhihui，Liu Xueping，Zhan Tao． The research of tempration control system based on type-K thermocouple［J］． Machinery Design and Manufacture， 2011( 4) : 7-9． ( in Chinese)
［3］马国华． 监控组态软件及其应用［M］． 北京: 清华大学出版社， 2005． Ma Guohua． The Application of Control Configuration Software［M］． Beijing: Tsinghua University Press， 2005． ( in Chinese)
［4］刘文超，金雪丰，文昌俊，等． 基于UC/OS －Ⅱ的陶瓷窑温度测控智能核研究［J］． 中国仪器仪表， 2006( 5) : 85-87． Liu Wenchao， Jin Xuefeng，Wen Changjun，et al． Research of the kiln temperature measurement and control system based on UC/OS －Ⅱ［J］． China Instrumentation， 2006( 5) : 85-87． ( in Chinese)
［5］戴欣荣，陈璐怡． 工业用便携式低功耗高精度数字温度计设计［J］． 国外电子元器件， 2003( 4) : 19-22． Dai Xinrong，Chen Luyi． The design of digital thermocouple meter with high precision and low power for industrial applications ［J］． International Electronic Elements， 2003( 4) : 19-22． ( in Chinese)
［6］白荷芳． 最优控制技术在高温熔炉系统中的应用研究［J］． 甘肃科技， 2003( 7) : 26-28． Bai Hefang． The applied research of optimal control technology in high temperature melting pot［J］． Gansu Science and Technology， 2003( 7) : 26-28． ( in Chinese)
［7］郑锁珍． 组态软件在炉温控制系统中的应用［J］． 机械管理开发， 2009， 24( 5) : 82-84． Zheng Suozhen． The application of configuration software in the system of temperature control［J］． Mechanical Management and Development， 2009， 24( 5) : 82-84． ( in Chinese)
［8］卫梁彦，王玲珑，吴薇． 一体化太阳能热泵热水器运行特性的实验研究［J］． 南京师范大学学报: 工程技术版， 2011， 11 ( 3) : 36-40． Wei Liangyan，Wang Linglong，Wu Wei． Experimental on the operating characteristics of solar heat pump water heater integrated with collector，storage and evaporation［J］． Journal of Nanjing Normal University: Engineering and Technology Edition， 2011， 11( 3) : 36-40． ( in Chinese)
［9］蒯锐． 基于Matlab 的实时多路温度采集系统设计［J］． 南京师范大学学报: 工程技术版， 2009，9 ( 2) : 18-21． Kuai Rui． Design of the real-time muti-channel temperature measuring system based on matlab［J］． Journal of Nanjing Normal University: Engineering and Technology Edition， 2009，9 ( 2) : 18-21． ( in Chinese)

备注/Memo

备注/Memo:
通讯联系人: 王宪菊，硕士，助教，研究方向: 测控技术． E-mail: wangxianjv@ qq． com
更新日期/Last Update: 2013-03-11