[1]王 影,丁树业,杨 智,等.自力风扇性构件诱发的电机内流型演变特性研究[J].南京师范大学学报(工程技术版),2020,20(02):031-38.[doi:10.3969/j.issn.1672-1292.2020.02.005]
　Wang Ying,Ding Shuye,Yang Zhi,et al.Studies on Flow Patter Evolution Characteristics bySelf-support Fan Components Inside Generator[J].Journal of Nanjing Normal University(Engineering and Technology),2020,20(02):031-38.[doi:10.3969/j.issn.1672-1292.2020.02.005]
点击复制

自力风扇性构件诱发的电机内流型演变特性研究
分享到：

南京师范大学学报（工程技术版）[ISSN:1006-6977/CN:61-1281/TN]

卷:
20卷
期数:
2020年02期
页码:
031-38
栏目:
电气工程
出版日期:
2020-05-15

文章信息/Info

Title:
Studies on Flow Patter Evolution Characteristics bySelf-support Fan Components Inside Generator
文章编号:
1672-1292(2020)02-0031-08
作者:
王 影1; 丁树业1; 杨 智2; 朱 敏1; 李镇江1; 李政辉1
(1.南京师范大学南瑞电气与自动化工程学院,江苏 南京 210023)(2.中国船舶重工集团公司第七〇四研究所,上海 200031)
Author(s):
Wang Ying1; Ding Shuye1; Yang Zhi2; Zhu Min1; Li Zhenjiang1; Li Zhenghui1
(1.School of NARI Electrical and Automation,Nanjing Normal University,Nanjing 210023,China)(2.704 Research Institute,China Shipbuilding Industry Group Co.,Ltd.,Shanghai 200031,China )
关键词:
自力风扇; 流体场; 流型演变; 结构性能; 数值分析
Keywords:
self-support fan; fluid field; flow pattern evolution; structure performance; numerical analysis
分类号:
TM312
DOI:
10.3969/j.issn.1672-1292.2020.02.005
文献标志码:
A
摘要:
大型电机内流体流动及温度分布与自力风扇性构件的结构性能密切相关,建立考虑具有自力风扇性构件性能的径向通风槽钢动态效应的电机内流场理论分析模型,并对其内部流场流型演变特性进行研究是电机领域的迫切需求. 以一台6.5 MW双馈水轮发电机为例,利用流体场基本理论及数值研究方法,建立三维非定常紊流流场求解模型,并通过有限体积法,分析转速及转子径向通风槽钢的结构形态对电机内流场流变特性的作用以及影响程度,进而探究转子径向通风槽钢作用下的电机内流体场流型演变规律,为电机径向通风槽钢的结构设计及通风性能优化提供借鉴.
Abstract:
The fluid flow and temperature distribution of large generators are heavily related to the structure of components with the performance of self-support fan. Therefore,it is an urgent need to study the evolution characteristics of the internal fluid field by building the theoretical analysis model,which considers the dynamic effect of the radial ventilation channel steels with the performance of self-support fan component. Firstly,in this paper,a 6.5 MW doubly-fed hydro-generator(DFIG)is taken as an example for studying. By using the numerical research method of the fluid field and establishing the model of the three-dimensional unsteady turbulent fluid field,the effects and influence level of factors such as the rotational speed and the structure of the rotor radial ventilation channel steel on the rheological property of the fluid field are analyzed. Then,the evolution law of fluid field in the generator under the action of the rotor radial ventilation channel steels with self-support fan characteristics is studied,which provides a reference for the structural design and ventilation performance optimization.

参考文献/References:

[1] LI W L,HAN J C,HUO F Y,et al. Influence of the end ventilation structure change on the temperature[J]. IEEE Transactions on Energy Conversion,2013,28(2):278-288.
[2]路义萍,王玉萍,孙雪梅. 某新型隐极同步电动机流场计算与分析[J]. 电机与控制学报,2017,21(10):47-53.
[3]YANG K,FENG Y J. Design of novel spiral magnetic poles and axial-cooling structure of outer-rotor PM torque motor[J]. IEEE Transactions on Applied Superconductivity,2013,20(3):838-841.
[4]贺文凯,顾德军,王鸿鹄. 两种不同通风结构对高压电机性能的影响[J]. 电机与控制应用,2014,41(6):36-38.
[5]POLIKARPOVA M,PONOMAREV P,LINDH P,et al. Hybrid cooling method of axial-flux permanent-magnet machines for vehicle applications[J]. IEEE Transactions on Industrial Electronics,2015,62(12):7382-7390.
[6]GAI Y H,KIMIABEIGI M,CHONG Y C,et al. On the measurement and modeling of the heat transfer coefficient of a hollow-shaft rotary cooling system for a traction motor[J]. IEEE Transactions on Industry Applications,2018,54(6):5978-5987.
[7]NERG J,RUUSKANEN V. Lumped-parameter-based thermal analysis of a doubly radial forced-air-cooled direct-driven permanent magnet wind generator[J]. Mathematics and Computers Simulation,2013,90:218-229.
[8]GAI Y,KIMIABEIGI M,CHONG Y C,et al. Cooling of automotive traction motors:scheme,examples,and computation methods[J]. IEEE Transactions on Industrial Electronics,2018,66(3):1681-1692.
[9]LI L W,GUAN C,CHEN Y. Influence of rotation on rotor fluid and temperature distribution in a large air-cooled hydrogenerator[J]. IEEE Transactions on Energy Conversion,2012,28(1):117-124.
[10]FAN X G,QU R H,ZHANG B,et al. Ventilation and thermal improvement of radial forced air-cooled FSCW permanent magnet synchronous wind generators[J]. IEEE Transactions on Industry Applications,2017,53(4):3447-3456.
[11]ZHANG S K,LI W L,LI J Y,et al. Research on flow rule and thermal dissipation between the rotor poles of a fully air-cooled hydrogenerator[J]. IEEE Transactions on Industrial Electronics,2014,62(6):3430-3437.
[12]LI W L,LI D,LI J Y,et al. Influence of rotor radial ventilation ducts number on temperature distribution of rotor excitation winding and fluid flow state between two poles of a fully air-cooled hydro-generator[J]. IEEE Transactions on Industrial Electronics,2017,65(5):3767-3775.
[13]CHONG Y C,ECHENIQUE SUBIABRE J P E,MUELLER M A,et al. The ventilation effect on stator convective heat transfer of an axial-flux permanent-magnet machine[J]. IEEE Transactions on Industrial Electronics,2013,61(8):4392-4403.
[14]XIONG B,GU G B,RUAN L,et al. Studies on the structure of radial ventilation channel to improve the cooling capacity of large turbo generator stator[C]//2014 17th International Conference on Electrical Machines and Systems. Hangzhou,2014:354-357.
[15]温嘉斌,鄢鸿羽. 定子通风槽钢对通风沟内流体流动形态的影响[J]. 电机与控制学报,2010,14(11):58-62.
[16]温嘉斌,刘艳翠,姜天一,等. 中型高压电机内风扇流体分析与温升计算[J]. 电机与控制学报,2018,22(4):33-41.
[17]温嘉斌,侯健,于喜伟. 定子通风槽钢对中型高压电机内温度场的影响[J]. 电机与控制学报,2016,20(8):40-47.
[18]刘平超,安志华,宫海龙,等. 新型通风槽钢作用下定子稳态温度场分布研究[J]. 大电机技术,2018(5):11-15.
[19]SHIMA K,IDE K,TAKAHASHI M,et al. Fast calculation of field currents and reactances for doubly fed generators with rotor duct pieces[J]. IEEE Transactions on Magnetics,2006,42(11):3730-3736.
[20]黄伯勇. 电机的发热与冷却[J]. 科技信息,2006(增刊5):47.
[21]ZHOU G H,HAN L,FAN Z N,et al. Ventilation cooling design for a novel 350-MW air-cooled turbo generator[J]. IEEE Access,2018,6:62184-62192.
[22]STATON D A,CAVAGNINO A. Convection heat transfer and flow calculations suitable for electric machines thermal models[J]. IEEE Transactions on Industrial Electronics,2008,55(10):3509-3516.
[23]DING S Y,WANG M Q. Comparison investigation of fluid rheological characteristics effect on stator temperature field for large hydro-generator based on experiment[J]. Compel International Journal of Computations and Mathematics in Electrical,2015,34(1):234-247.
[24]HAN J C,GE B J,LI W L. Influence of magnetic permeability of the press plate on the loss and temperature of the end part in the end region of a turbo generator[J]. IEEE Transactions on Industrial Electronics,2019,66(1):162-171.
[25]ZHANG Y J,RUAN J. J,HUANG T,et al.,Calculation of temperature rise in air-cooled induction motors through 3-D coupled electromagnetic fluid-dynamical and thermal finite-element analysis[J]. IEEE Transactions on Magnetics,2012,48(2):1047-1050.

备注/Memo

备注/Memo:
收稿日期:2019-12-26.
基金项目:国家自然科学基金项目(51977112)、江苏省自然科学基金项目(BK20191370)、江苏省青蓝工程项目(2019).
通讯作者:丁树业,博士,教授,研究方向:电机综合物理场数值分析及特种电机理论. E-mail:dingshuye@163.com
更新日期/Last Update: 2020-05-15